top of page
TECHNICAL STRENGTH
ICS ( Intelligence Chucking System )
Takes advantage of the ample 300 mmm stroke to reduce the number of bar re-chucks during long production runs.
Instead of rechecking for each part the spindle feeds 280mm of material to make multiple parts in a single chucking operation and increments forward for each part.
See how this can save even more off your cycle time.
The intelligence chucking for the below workpiece reduces by 1.5sec and increases 15% of daily yield.
VFT ( Variable frequency turning )
Variable Frequency Turning (VFT) uses a modified sine wave equation to move the cutting tool at varying intervals to allow for greater chip thinning and chip breakage.
This allows for better heat dissipation, chip control, and less machine downtime for taking care of chip issues.
RTC ( Rapid Tool Change )
Saves cycle time by moving the tool in a smooth arc.
Instead of moving fully back, over and up for each tool change.
The function calculates the smoothest and most efficient transition path from tool to tool saving time on every tool change.
Savings that add up to a significant reduction of cycle time, which means more profits for you.
Programe Change
T0101 ;
M3 S3200 ;
G0 X27. Z0. ;
G99 G1 X25.5 F0.3 ;
T0101 M3 S3200 ; X27. Z0.
G99 G1 X25.5 F0.3 ;
Custom function
Repetitive operations commonly used for settings consist of several custom functions so that users can use them more practically.
Also Screen captures of M42 Initial tool setting, manual tool calling function & crash prevention setting are the below
Custom function
(Manual tool call &crash prevention)
Also Screen captures of M42 Initial tool setting, manual tool calling function & crash prevention setting are the below
Casting Bed
Based on the Mihanite casting method from the beginning of the TCM Industry, it is produced by the manufacturing method according to the current JIS standard.
In particular, natural annealing contributed to the elimination of internal residual stress and enhancement of toughness by forming microstructures and removing segregation diffusion.
And body structure design by advanced FEM analysis Program.
Interior Room
Interior Room
One of the common complaints we hear about Swiss-types is the lack of interior room available for setup.
We know that a dark, cramped interior space is not the ideal environment for anyone.
We responded by engineering the cabinet of TCM series Swiss type auto lathes to be as spacious as possible within the machine’s minimal footprint.
bottom of page